1～15 item / All 24 items
Supports measurement of white LEDs and all visible light.
● 4 range switch (Ix: 200/2,000/20,000/200,000 Ix, Fc: 20/200/2,000/20,000 Ix) ● Equipped with a hold function (reading value, maximum value), making data management easy.
Low-cost, integrated digital illuminance meter with calibration function for stable measurements.
This is a low-cost, integrated digital illuminance meter. It features a calibration function that allows for stable measurements at all times. ■Features ● Automatic Calibration When powered on, automatic zero calibration is performed. ● LUX/FC Two types of units, LUX and FC, can be selected. ● RANGE Switching Three patterns of range switching are possible: 1, 0.1, and 0.01. ● HOLD It is possible to hold the measurement value during measurement. ● Soft Case Included A convenient soft case for storage is included as standard.
Check the amount of light with a digital display! Measurable from 0.1 to 19990 lux.
● Three range switching from low illumination to high illumination (200/2000/20000 lux). ● Equipped with a data hold function. ● The light sensor and the main unit are separable, allowing measurements at the optimal position.
Automatic zero correction and hold function included.
The liquid crystal digital display allows for a wide measurement range of 0.00 to 40000 lx, which can be switched between auto range or four range settings.
Both small and large illuminance are acceptable, and it is compatible with RS-232C!
● Waterproof design for the front panel ● Data hold function ● Peak value display function ● Maximum and minimum value display function
With peak hold function
The MI1T-139M is a low-cost digital illuminance meter that can measure a wide range of illuminance from 0 to 400,000 Lux / 50,000 foot-candles (fc) with automatic range switching. It displays illuminance in both numerical and bar graph formats. The MI1T-139M automatically compensates for differences in light sources, allowing for illuminance measurements with any type of light source, including tungsten bulbs, fluorescent lights, mercury lamps, and sodium lamps.
It is a super compact pocket-type digital illuminance meter.
It is possible to measure over a wide range with an automatic range switch from 0 to 40,000 Lux. The MI1T-97M features a maximum illuminance memory display function in addition to the normal illuminance measurement mode.
It is a compact illuminance meter with an automatic backlight and MAX hold function.
●Compact pocket-sized all-in-one design ●Simple operation with one button ●Large LCD with automatic backlight function
Digital illuminance meter
Digital light meter
With the dynamic range switch, it can accommodate a wide range of illuminance measurements from 0 to 400,000 Lux / 40,000 foot-candles (fc).
■Features Equipped with a peak hold function, it can memorize the maximum and minimum illuminance that changes in units of 1/100,000 seconds. By using this function, it is possible to measure the illuminance of light pulses that change in very short time intervals. Additionally, it has a maximum and minimum illuminance memory that changes in units of 0.77 seconds, hold function, illuminance change value measurement, and a backlight function that allows visibility of values even in dark places, making it a multifunctional illuminance meter.
Illuminance can also be displayed in foot-candles (fc).
■Features This is a multifunctional illuminance meter that can utilize features such as a backlight function that allows visibility in dark places, a measurement hold function, minimum or maximum illuminance measurement modes, light pulse peak minimum or maximum measurement modes, and illuminance error measurement modes. It comes packaged with the main unit, sensor, and battery in a hard case.
Sensitive photodiode with cosine correction for wide-range light measurement.
● Measurement range setting: Manual/Automatic switchable ● Maximum and minimum value display ● Hold function ● Tripod mounting screw hole
Every time the power is turned on, zero calibration is performed, allowing for accurate measurements.
●Compact size ●Zero calibration function
Equipped with a light source selection function and compatible with RS-232C!
● Light source selection function (4 types) ● Front panel waterproof design ● Data hold function ● Peak value display function ● Maximum and minimum value display function
It comes with a data hold function to fix the measurement data.
●It features a peak hold function that displays the peak value at the time of measurement. ●The unit of Lx/fc can be switched with a single touch.
